Please note that ALL Harlequin single skin oil tanks will be increasing in price by approximately 15% as of the close of business on Friday 11th December 2009, so to beat the price increase ORDER TODAY!
Harlequin 1100SL Single Skin Oil Tank
Length: 1650mm
Width: 690mm
Height: 1420mm
Actual Capacity: 1095 litres
Nominal Capacity: 1040 litres
Product Summary
Harlequin single skin bottom outlet oil tanks are for home heating oil at family homes. They can only be used where a bunded oil tank is not required, subject to a full site survey by an Oftec registered engineer. If in any doubt please contact Oftec on www.oftec.org or on 0845 65 85 080
2" BSP Lockable Fill Point with Cap and Chain
4" Inspection Point with Plastic Screw Cap
2" Vent
1" BSP Bottom Outlet
Oil Tank Contents Dipstick
Please note that this single skin oil tank is designed for the storage of heating oil, where applicable under statatury requirements, and is NOT suitable as a gravity feed vehicle fueling system. For the re-fuelling of vehicles please see our Harlequin bunded Fuel Point, bunded Fuel Station and bunded bio-Fuel Station ranges.
Important Information: Single Skin Oil Tanks
Single Skin Oil Tanks do not incorporate any form of secondary containment. Therefore in the event of a spillage, a pollution incident will result. Consideration therefore should always be given to installing a Bunded Oil Tank. Bunded oil storage tanks are proven to significantly reduce the likelihood of a pollution incident, with all the corresponding clean up costs and fines, in the event of an oil leak. Fitting a single skin fuel oil tank where a bunded tank is require is an offence.
Installation Requirements
All oil tanks must be installed, and all maintenance carried out by, an Oftec registered engineer in accordance with the supplied instructions, statutory requirements and the requirements of Oftec Technical Book 3. OFTEC and British Standard BS5410 require that all fuel and oil storage tanks should be installed upon a base of adequate strength that extends a minimum of 300mm beyond the maximum dimensions of the tank.
RPM Fuels & Tanks will not be responsible for oil tank installations which do not comply with these requirements and where a single skin oil tank has been installed where a bunded tank is a legal requirement.
Pricing & Delivery:
Prices quoted include delivery to anywhere on mainland UK and Northern Ireland but excludes offshore islands and locations. Deliveries will be made by articulated lorry and it is the customers responsibility to ensure safe and adequate access plus off loading. Off loading of heavy items should be made by fork lift or similar heavy lifting equipment. If there is any doubt about delivery access or off loading please contact us to discuss the options available. Please allow 10 working days for delivery.