Harlequin 1300ENV Top Outlet or BND Bottom Outlet Advance Bunded Oil Tank
Length: 2150 mm
Width: 950 mm
Height: 1540 mm
Dry Weight: 160 kg
Actual Capacity: 1405 litres
Nominal Capacity: 1335 litres
Product Summary
Demanding commercial and home heating installations are easily handled by the Harlequin 1300 ENV/BND Advance Bunded Oil Tank. Fully bunded and available with either top and bottom outlet openings the tank is precision rotationally moulded from oil resistant, superior grade medium density polyethylene for a durable and extremely strong finish. In fact, it exceeds all applicable UK and EU fuel storage requirements, making it a great long-term future proof investment that won’t fail to live up to expectations.
• 2" Lockable Fill Point with Screw Cap
• 4” Lockable Inspection Aperture with Plastic Screw Cap
• 2” Vent
• Lockable Manhole Access
• Oil Tank Contents Dipstick
• Apollo Electronic Oil Tank Contents Gauge
• Oil Tank Bund Warning Alarm
• LRC Failsafe Overfill Prevention Capability
• Lockable Manhole Access
• 1” BSP Bottom Outlet complete with Oil Tank Fitting Kit - BND Bottom Outlet Bunded Oil Tank models only
• 15mm Top Outlet incorporating Suction Pipe; Isolation Valve and Non Return Valve – ENV Top Outlet Bunded Oil Tank models only
Please note that this bunded oil tank is designed for the storage of heating oil and is NOT suitable as a gravity feed vehicle fueling system. For the re-fuelling of vehicles please see our Harlequin bunded Fuel Point, bunded Fuel Station and Harlequin bunded bio-Fuel Station ranges.
ENV Top Outlet Bunded Oil Tanks
Harlequin's top outlet advance bunded oil tanks are only suitable where a pressure jet boiler or oil lifting equipment is installed. If you have any doubts about the compatibility of a top outlet bunded oil tank and your appliance then please contact the boiler manufacturer.
Installation Requirements
All oil tanks must be installed, and all maintenance carried out by, an Oftec registered engineer in accordance with the supplied instructions, statutory requirements and the requirements of Oftec Technical Book 3. OFTEC and British Standard BS5410 require that all fuel and oil storage tanks should be installed upon a base of adequate strength that extends a minimum of 300mm beyond the maximum dimensions of the tank.
RPM Fuels & Tanks will not be responsible for oil tank installations which do not comply with these requirements.
Pricing & Delivery:
Prices quoted include delivery to anywhere on mainland UK and Northern Ireland but excludes offshore islands and locations. Deliveries will be made by articulated lorry and it is the customers responsibility to ensure safe and adequate access plus off loading. Off loading of heavy items should be made by fork lift or similar heavy lifting equipment. If there is any doubt about delivery access or off loading please contact us to discuss the options available. Please allow a minimum of 10 working days for delivery.