Harlequin 1400 ENV Top Outlet and BND Bottom Outlet Advance Bunded Oil Tank
Length: 1940 mm
Width: 1250 mm
Height: 1420 mm
Dry Weight: 130 kg
Actual Capacity: 1452 litres
Nominal Capacity: 1380 litres
Product Summary
The Harlequin 1400 ENV/BND Advance Bunded Oil Tank is an all-in-one, highly functional fuel storage tank specifically engineered for the storage of heating oil. Usable in commercial and domestic above ground heating installations, the tank is fully bunded and rotationally moulded from superior grade, oil resistant medium density polyethylene. It exceeds all EU and UK compliance regulations and can be supplied with either a top outlet or bottom outlet connection for maximum versatility.
• 2" Lockable Fill Point with Screw Cap
• 4” Lockable Inspection Aperture with Plastic Screw Cap
• 2” Vent
• Lockable Manhole Access
• Oil Tank Contents Dipstick
• Apollo Electronic Oil Tank Contents Gauge
• Oil Tank Bund Warning Alarm
• LRC Failsafe Overfill Prevention Capability
• Lockable Manhole Access
• 1” BSP Bottom Outlet complete with Oil Tank Fitting Kit - BND Bottom Outlet Bunded Oil Tank models only
• 15mm Top Outlet incorporating Suction Pipe; Isolation Valve and Non Return Valve – ENV Top Outlet Bunded Oil Tank models only
Please note that this bunded oil tank is designed for the storage of heating oil and is NOT suitable as a gravity feed vehicle fueling system. For the re-fuelling of vehicles please see our Harlequin bunded Fuel Point, bunded Fuel Station and Harlequin bunded bio-Fuel Station ranges.
ENV Top Outlet Bunded Oil Tanks
Harlequin's top outlet standard bunded oil tanks are only suitable where a pressure jet boiler or oil lifting equipment is installed. If you have any doubts about the compatibility of a top outlet bunded oil tank and your appliance then please contact the boiler manufacturer.
Installation Requirements
All oil tanks must be installed, and all maintenance carried out by, an Oftec registered engineer in accordance with the supplied instructions, statutory requirements and the requirements of Oftec Technical Book 3. OFTEC and British Standard BS5410 require that all fuel and oil storage tanks should be installed upon a base of adequate strength that extends a minimum of 300mm beyond the maximum dimensions of the tank.
RPM Fuels & Tanks will not be responsible for oil tank installations which do not comply with these requirements.
Pricing & Delivery:
Prices quoted include delivery to anywhere on mainland UK and Northern Ireland but excludes offshore islands and locations. Deliveries will be made by articulated lorry and it is the customers responsibility to ensure safe and adequate access plus off loading. Off loading of heavy items should be made by fork lift or similar heavy lifting equipment. If there is any doubt about delivery access or off loading please contact us to discuss the options available. Please allow a minimum of 10 working days for delivery.